Darkside DPF Delete Downpipe for 2.7 and 3.0 V6 TDi Engine

3" Stainless Downpipe DPF Delete for 2.7 / 3.0 V6 TDi with Garrett VK Turbocharger

This 3" Stainless Steel Downpipe DPF Delete is a straight replacement to remove the factory Diesel Particulate Filter (DPF) on the 2.7 / 3.0 V6 TDi Vehicles

• Increased performance and driveability
• Made from Aircraft-grade Stainless Steel
• High Flow for maximum performance
• Includes Gaskets
• Designed and made in the UK

There are two types of DPF for the 2.7 and 3.0, please provide a chassis number before purchase to ensure you will get the correct part

DPF Delete Part Numbers (these can be checked by your local Audi Dealer):

Short - 8K0254751EX - 8K0254751 EX - 8K0 254 751 EX
Short - 8K0254750SX - 8K0254750 SX - 8K0 254 750 SX
Short - 8K0254251AX - 8K0254251 AX - 8K0 254 251 AX
Long - 8K0254750LX - 8K0254750 LX - 8K0 254 750 LX

This kit consists of:

1x Darkside Developments 3" DPF Delete Downpipe
1x GTB Elongated Downpipe Gasket
1x DPF to Exhaust Gasket
1x GTB Even Spaced Downpipe Gasket

This item will fit Vehicles with the following Engine Codes:

Audi A4 / Avant

Audi A4 / S4 / Avant / quattro

Audi A5 / S5 Cabriolet

Audi A5 / S5 Coupe Sport

Audi Q5

Audi A4 allroad quattro

Replaces Genuine VW Part Numbers:

Short - 8K0254751EX - 8K0254751 EX - 8K0 254 751 EX
Short - 8K0254750SX - 8K0254750 SX - 8K0 254 750 SX
Short - 8K0254251AX - 8K0254251 AX - 8K0 254 251 AX
Long - 8K0254750LX - 8K0254750 LX - 8K0 254 750 LX

When buying the DPF Delete Pipe you will require a custom ECU Remap to erase any fault codes or engine management lights. We will not be responsible for any problems that may occur with any other tuners software

Please Note: The pressure sensor boss will need slight modification on some models (8mm shorter) Test fit the pressure sensor pipe prior to installing.

Darkside DPF Delete Pipes are supplied with only a Lambda Sensor Boss. The Pre-Turbo EGT Boss is located in the Exhaust Manifold on the Turbocharger. All other EGT and Pressure Sensors are not required when removing the DPF, leaving them in the downpipe can eventually lead to sensor failure, creating a fault in the ECU and possibly a Check Engine Light in the Instrument Cluster. With the correct DPF Delete Software, these sensors are removed entirely so they can be unplugged and removed from the car. If your tuner cannot remove these faults, the sensors should be left plugged in and wrapped out of the way

Darkside Developments accepts no responsibility for the use of this part on the public highway where removal of emissions controls is prohibited. It is the customers responsibility to ensure they comply with rules and laws relating to their home country