



In-stock products will be delivered within 2 - 3 business days
034Motorsport is proud to offer the ultimate rear sway bar upgrade for the Audi 8J/8P TT/TTS/TTRS & Audi A3/S3/RS3 and MkV/MkVI Volkswagen R32 & Golf R! The 034Motorsport Adjustable Solid Rear Sway Bar is made from high-quality spring steel for maximum rigidity, and is designed to combat understeer while reducing body roll under hard cornering. This product was tested thoroughly on the street and track on the 034Motorsport Audi TT RS 2.5 TFSI before release. The 034Motorsport Adjustable Solid Rear Sway Bar substantially reduces understeer and body roll without compromising comfort on the street. This Sway Bar also utilizes greaseless Teflon-lined bushings for a service-free and silent driving experience!
Please Note: We highly recommend using this upgrade in conjunction with Spherical Rear Sway Bar End Links for maximum performance.
Please Note: For lowered vehicles, always check all clearances over the full articulation of the suspension in order to identify possible interference. We recommend running 034Motorsport suspension components, as they have been designed and tested to work together, without interference.

NVH is the measurement of how much noise, vibration, & harshness gets transmitted into the cabin of your vehicle. 034Motorsport Sway Bars transfer none to low amounts of NVH to the cabin based on user feedback. 034Motorsport Sway Bar Bushings should be lubricated on average every ~6 months for safe upkeep, or if you hear the bushings start to make any noise. NVH is subjective so some users may find NVH to be increased or decreased from our rating.
This product was tested thoroughly on the street and track on both the 034Motorsport Audi TT RS 2.5 TFSI and Nate@034's Audi A3 before release. The 034Motorsport Adjustable Solid Rear Sway Bar substantially reduces understeer and body roll on the Audi 8J/8P and MkV/MkVI Volkswagen R32 & Golf R without compromising comfort on the street.
In addition, the 034Motorsport Rear Sway Bar is engineered to be used effectively with the stock front sway bar. No upgrade in the front is needed or required. The addition of a stiffer front bar introduces even more push, requiring an even bigger bar in the back. With the stock front sway bar and upgraded 034Motorsport Solid Rear Sway Bar, body roll is virtually eliminated while turn in and off throttle oversteer are greatly improved.
The sway bar rate is adjustable via the adjustment holes. The two holes closest to the MOI of the bar are the "stiff" (423% stiffer than stock) setting, and the two holes farther out are the "soft" (362% stiffer than stock) setting.
034Motorsport Sway Bar Kits feature maintenance-free polyurethane bushings with a Teflon and polyester liner designed to enhance sway bar response speed while minimizing noise, vibration, and harshness (NVH). This liner also results in an extended service life that allows these bushings to even outlast your vehicle. With no need for additional lubrication, these bushings offer reliable, long-lasting performance without the hassle of regular maintenance and greasing. Built to withstand extreme conditions, the bushings are hydrophobic, heat-resistant up to 500°F, and resistant to water and common automotive chemicals. These bushings are covered by a limited lifetime warranty which covers material cracking, separation of the Teflon liner and polyurethane bushing, or squeaking under normal street or track conditions.
The installation of your 034Motorsport Adjustable Solid Rear Sway Bar for 8J/8P Audi & MkV/MkVI Volkswagen is a relatively simple process that will take approximately one hour to complete. You can access our detailed installation guide by clicking the link below
Can’t find the part you're after?
We can source all 034 MOTORSPORT products, including those not listed on our website.
Click here to contact us if the part you're searching for isn't listed.
Thanks for subscribing!
This email has been registered!