034MOTORSPORT Dynamic+ TCU Software Upgrade for AL551 ZF8 Transmission, B8/B8.5 Q5/SQ5, C7/C7.5 A6/A7 3.0TFSI
034 Motorsport

034MOTORSPORT Dynamic+ TCU Software Upgrade for AL551 ZF8 Transmission, B8/B8.5 Q5/SQ5, C7/C7.5 A6/A7 3.0TFSI

$850.00 In Stock Sold out
FLASHING

1-3 Dispatch On In-Stock Items

100% Genuine Quality Parts

Workshop Install Available

  • Description
  • Shipping & Backorder
  • VEHICLE FITMENT

*This software can only be applied either by purchasing an 034 Dynamic + flashing kit or choosing the 'Inhouse' flashing option to have it flashed and logged in our Wellington workshop.

Inhouse flashing $114 (Incl GST), oflash your vehicle yourself using the '034 Dynamic+ Flashing Kit':  https://shop.sutherlandperformance.co.nz/products/dynamic-end-user-flashing-kit

 

DESCRIPTION

Flashed directly through your vehicle’s OBD-II port, 034Motorsport’s proprietary calibrations for the AL551 TCU safely and effectively optimize its operation for Stage 1, Stage 2, or Stage 2+ Dynamic+ Performance ECU Software. The result is a noticeable improvement in acceleration, without any sacrifice in comfort or reliability.

DYNAMIC+ TCU TUNING FEATURES:

Increased Maximum Shift Point

  • With accompanying 034Motorsport ECU tuning, the maximum RPM before shifting is raised from the factory 6,300RPM to 7,200RPM, significantly increasing the ability to maximize the performance of your supercharged V6!

 

Improved Shift Speeds

  • To further enhance the drivability of your Audi, the shift times are dramatically decreased in all driving modes, which ultimately results in quicker acceleration.

 

Optimized Launch Control

  • Torque converter stall during launch control has been raised to allow for a higher launch RPM, maximizing the performance of your supercharged V6 at the drag strip!

 

Advanced Launch Control Compatibility

  • Alongside the standard launch control, the Dynamic+ AL551 TCU Tune is compatible with Advanced Launch Control, found on all 034Motorsport Supercharged 3.0T ECU Tunes (Non-CREC).

 

Advanced Launch Control on AL551 Equipped vehicles adds:

Adjustable Launch RPM via Cruise Control Stalk

  • Limited to Maximum Torque Converter Stall RPM

 

Adjustable Launch Load via Throttle Pedal

  • Maximize available traction by launching by changing the pedal angle while staging! For maximum load, floor it!

 

Cooling Fans & Auxiliary Supercharger Coolant Pump at 100% below 10kph

  • With the cruise control stalk in the ON position, the cooling fans and auxiliary supercharger coolant pump will run at 100% duty cycle to minimize heat soak and reduce charge air temps in preparation for your next run down the strip! Once beyond 10kph, the cooling fans and auxiliary pump resume regular operation.

 

Soft Cut and Ignition Cut Style Launch Control

  • Depending on the ECU file you are running, launch control RPMs will be limited by our Fuel Cut Launch Strategy or our Ignition Cut Strategy. Ignition Cut Launch Control is only available on Test-Pipe files for Sanctioned Racing Use Only.

 

IMPROVED TORQUE MANAGEMENT:

As with any automatic transmission vehicle, the ECU and TCU computers work synchronously to properly apply torque to the vehicle's drivetrain in a safe and reliable manner. Within both the ECU and TCU, there are factory safety tables that limit overall torque output based upon what the factory first tuned the car for. The ECU reports the output of torque from the engine to the TCU, and the TCU decides if this is suitable, or too much. If it is too much, the TCU will command the ECU to reduce torque output based upon its safety tables.

034Motorsport takes a holistic approach with its Dynamic+ Tuning, and aims to retain as many OEM safety protocols as possible. While it is possible to tune around the factory TCU torque limiters from the ECU side, this is done at the expense of torque safety features that are integral in keeping your transmission running safely. 034Motorsport’s calibrators tune the ECU to work with the TCU to provide accurate torque values, and recalibrate the appropriate safety ranges for the TCU. Taking these extra steps to retain OEM safety systems on the ECU and TCU side is just one of the many reasons that Dynamic+ software provides substantial yet reliable performance increases.

  STOCK TCU SOFTWARE 034MOTORSPORT PERFORMANCE TCU SOFTWARE
Maximum Shift RPM 6,300 RPM 7,200 RPM
Launch Control RPM** Single Point - ~2,100 RPM Maximum Converter Stall RPM - Varies based on TQ Output (2,900-3,400 RPM)
Advanced Launch Control Compatibility No Yes
Torque Limit Stock Increased to Match ECU Tune
Shift Speed Slow Fast

 

034MOTORSPORT DYNAMIC+ END USER FLASHING KIT:

034Motorsport's Dynamic+ End User Flashing Kit allows customers to install their 034Motorsport Dynamic+ Performance Software themselves. In addition, End User Flashing allows Dynamic+ Performance Software customers to receive and install software updates and revisions, flash back to stock, or upgrade to the next stage of performance software for their vehicle.


Requirements for End User Flashing:

  • Windows 10/11 Laptop with Available USB Port
  • Power Supply for Laptop
  • Secure Wired (Or Very Stable WiFi) High-Speed Internet Connection
  • Battery Charger, 20AMP minimum (CTEK Brand recommended)
  • Available Electrical Outlets


034Motorsport End User Flashing Kit Contents:

  • 034Motorsport OBD-II Adapter
  • USB-A to USB-B Cable
  • Carrying Case
  • User Credentials (Provided Via Email)

 

034Motorsport Dynamic+ Flashing Portal:

 

EMISSIONS DISCLAIMER

  • This product is sold for racing use as well as use on vehicles not registered for on highway use.
  • By purchasing this product, you understand that this product is sold for racing use as well as used on vehicles not registered for on highway use, and that it is not legal for use on highway or street vehicles.

 

WELCOME TO DYNAMIC+ TUNING!

034Motorsport's Dynamic+ Performance Software provides reliable horsepower and torque increases through driver-centric calibrations that elevate driving enjoyment and precision. The Dynamic+ Tuning Philosophy emphasizes safety and reliability, with the goal of optimizing power delivery without compromising the longevity of the engine and related components.

Included with the Purchase of Any Dynamic+ Tune:

  • 30 Day Money Back Guarantee
    • 034Motorsport offers a 30 Day Money Back Guarantee on Dynamic+ ECU & TCU Tuning Software & Flashing Cable to ensure your complete satisfaction with our products and tuning. If you are not 100% satisfied with the Dynamic+ Transformation on your Volkswagen or Audi, please email tuning@034motorsport.com within 30 calendar days of the initial flash, and we will process a full refund to the original payment method.
  • Easy Map Switching
    • When purchasing any 034Motorsport staged tune, all octanes for that specific tune are included, as is the vehicle’s stock file.
    • Switching files is easy when using the Dynamic+ Flashing Portal on your Windows 10/11 computer, with mobile support coming soon!
  • World Class Tuning Support
    • 034Motorsport’s World Class Tuning Support Team is available 5 days a week standing by to answer and assist with any questions you may have regarding your Dynamic+ Tune, recommended hardware upgrades, or help to diagnose any issues you may have with your vehicle while flashing, or after you’ve flashed.
  • Advanced Technological Support
    • The 034Motorsport Dynamic+ Tuning Suite also offers enhanced to users to allow users to datalog their Volkswagen or Audi to ensure that it is running properly. This logger is available to be used with our Tuning Support Team and is not designed to be reviewed by the end user.

 

 

Can’t find the part you're after?

We can source all 034 parts including those not listed on our website.

Click here to contact us if the part you're searching for isn't listed.

Make

Model

Years

Chassis

Engine

Audi

A6

2012-2018

C7/C7.5

3.0 TFSI

Audi

A7

2012-2018

C7/C7.5

3.0 TFSI

Audi

A8

2011-2018

D4

3.0 TFSI

Audi

Q5

2009-2017

B8/B8.5

3.0 TFSI

Audi

SQ5

2009-2017

B8/B8.5

3.0 TFSI