1-3 Dispatch On In-Stock Items
CODE: 1299+1604
Categories: All, Audi, Best selling products, BMW, Consumables & Additives, Liqui Moly, New products, VW
100% Genuine Quality Parts
Workshop Install Available
- Description
- Shipping & Backorder
Foam Filter Cleaner (1L)
Water-miscible cleaning concentrate specially formulated for air filters. Excellently dissolves dust, dirt and grease and cleans gently, without damage to the foam pores. Has high capacity and is therefore economical to use.
- excellent cleaning effect
- biologically degradable
- economical to use
- cleans efficiently and gently
- excellently dissolves dust, dirt and grease
- economical to use
- does not contain flammable solvents or hazardous substances
Application
Place filter in suitable vessel. Mix cleaner with water. Depending on the degree of contamination, the dosage must be between 1:5 and 1:10 (1 part cleaner to 5-10 parts water). Plunge the filter entirely into the cleaning solution and allow to work for 5-10 minutes. Then carefully knead the filter in the solution until it is completely clean both inside and outside. Do not under any circumstances wring the filter out, as this could cause damage. Then rinse the filter out under fresh water until the cleaner has been flushed out completely. If any stubborn contamination remains, repeat the process if necessary. Allow the filter to dry in the ambient air before installation. Then wet with LIQUI MOLY Air Filter Oil.
Other information
Wear suitable gloves (e.g. disposable gloves) when using. Oil residues remaining in the air filter is normal, even desired. The air filter should only be cleaned of dust, dirt and grease.
Foam Filter Oil (Spray 400ml)
Specially developed aerosol for wetting foam and fabric air filters. Dust and dirt are reliably trapped even under extreme operating conditions and engine damage is thus avoided. Guarantees an optimal air flow and thus maximum engine output.
- extremely adherent
- long engine service life
- reduces wear
- waterproof
- improves filter properties
- binds dust and sand
Application
First free the filter of coarse contaminants by knocking them out. Clean the air filter with LIQUI MOLY Motorbike Air Filter Cleaner (part no. 1299), wait for the solvent to evaporate and coat with Motorbike Air Filter Oil (spray). Before installing the air filter, allow it to air out for 10 to 15 minutes.
When working with Air Filter Oil (spray), make sure that the area is well ventilated!
|
Can’t find the part you're after?We can source all 034Motorsport parts including those not listed on our website. Click here to contact us if the part you're searching for isn't listed. |
