Intakes & Forced Induction

The Ramair Silicone Intake Pipe (part no. RIP-007-BK) has been designed to replace the standard OEM plastic induction hose on the 1.8 & 2.0 TSI EA888 engine in the VW Golf MK7 GTI, VW Golf MK7 R, Audi S3, SEAT Leon Cupra and other...

SIMPLY THE BEST.  One of our most popular products is the VWR Cold-Air Intake System kit, enabling cold, dense air from outside the engine bay to reach the fuel metering unit more efficiently for 2.0 TDI engined Golf 7 and other MQB-platform cars. Our giant high-flow filter construction is simply...

This is a performance enhancing induction kit for the MK8 Golf R 2.0, Tiguan R 2.0 and Skoda Superb 280 with EA888 Gen 4 EVO engines - Right Hand Drive Models Only. Some New Zealand new MK8 GTI's run an earlier EA888.3 evo engine...

Application list: VW Golf 8 GTI 2,0TSI 180KW/245PS BJ. 2020<   The WagnerTuning Air Intake System is a direct replacement for the factory system removing all the OEM bottlenecks. With complex 3D flow simulations, the carbon air inlet system has been optimized for the...

VW Golf 7 GTI 2,0TSI BJ. 2013-2019 (MKB: CHHB/CHHA/DLBA/CJXE/CJXG/DNUC)VW Golf 7 R 2,0TSI BJ. 2013-2020 (MKB: CJXG/CJXC/DNUE/DJHA)Skoda Octavia RS 2,0TSI BJ. 2013-2018 (MKB: CHHB/CHHA/DLBA)Seat Leon Cupra 2,0TSI BJ. 2014-2019 (MKB: CJXE/CJXA/CJXH/DNUC/CJXC/DNUE/CJXG) **small adjustment necessary The WagnerTuning Air-Intake-System is a direct replacement for the factory...

UNIQUELY ENGINEERED This is not another mass produced "filter on a stick". IE's cold air intake has been specifically engineered and developed using professional racing design aspects and specialized computational flow dynamic software. The result is a true Motorsport intake system that sounds and...

LARGER THROTTLE 20% MORE FLOW OVER STOCK THROTTLE UP TO 548 HP ON DUAL PULLEY SETUP NO DIY WIRING PLUG & PLAY HARNESS INCLUDED IE's throttle body upgrade kit for the supercharged Q5 & SQ5 removes the restrictive stock throttle body and replaces it with a free-flowing V8-sized monster. This...

CTS Turbo is pleased to offer the ultimate high flow throttle pipe kit for the MQB model range vehicles.  The OEM Charge pipping leaves something to be desired with inefficient bends, and blockages not optimized for performance.  The CTS Turbo throttle pipe increases the...

FLOW EQUALS POWER Upgrading our Audi 3.0L turbocharged engine with aftermarket upgrades such as ECU tunes and larger turbos adds fast and easy power, but demands more airflow in return. The factory airbox and turbo inlet are adequate enough for stock power output, but...

 Carbon Fiber Intake System IE's carbon fiber intake system flows 37% more than the stock intake & inlet on the factory turbocharger and up to 61% more on hybrid turbo setups. This increase translates to a maximized flow rate that significantly improves turbo &...

This is an over size turbo inlet pipe for the IHI turbo chargers used on the 2.0 and 1.8 TFSI (EA888) engines used in MQB chassis vehicles such as (but not limited to) the Golf GTI (mk7) and Audi S3 (8P). This is a...

The Ramair Panel Filter range is made from twin core Ramair Aeriform foam and our stainless steel cage which is used in many of our tier 1 Motorsport applications for maximum strength. A rubber polymer surround gives a fantastic clean and smooth finish with...

BOLT-IN RELIABLE POWER The Garrett PowerMax GT2260S turbocharger is a direct bolt-in replacement for your factory installed IHI IS20 or IS38 turbo making for a simple easy turbo upgrade. When combined with required hardware and ECU calibration this will offer 450-485 base horsepower without sacrificing reliability...

BREATHE FREE Set your TSI engine free by allowing it to breathe better and operate more efficiently. WHAT DOES IT DO? Looking for a simple, warranty-friendly upgrade for your car? Our High-Flow Panel Air Filter is now available for the latest Polo GTI 1.8...

This PRORAM performance filter has been designed to replace your standard OEM air filter inside your vehicles air box. These filters are made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase...

** MUST HAVE RACINGLINE INTAKE KIT FITTED ** LET YOUR ENGINE BREATHE Take your RacingLine Intake to the next level with our Intake Upgrade Kit. For Audi S1, Polo GTI 1.8 and Ibiza Cupra 1.8. NOTE: Right Hand Drive Cars Only   WHAT'S SO...

WHAT'S SO SPECIAL? One of our most popular products is the VWR Cold-Air Intake System kit, enabling cold, dense air from outside the engine bay to reach the fuel metering unit more efficiently for the latest 6C Polo GTI 1.8 and Ibiza Cupra 1.8....

Set your 1.4 TSI Twincharger engine free by allowing it to breathe better and operate more efficiently. WHAT DOES IT DO? Looking for a simple, warranty-friendly upgrade for your car? This High-Flow Intake Air Filter, available for the 1.4 TSI 'Twincharger' engine in Polo...

Our high-performing cold-air induction systems for the Golf 6 GTI, Scirocco GT and Audi A3 with 2.0 TSI engines. WHAT'S SO SPECIAL? One of our most popular products is the VWR Cold-Air Intake System kit, enabling cold, dense air from outside the engine bay...

One of our most popular products is the VWR Cold-Air Intake System kit, enabling cold, dense air from outside the engine bay to reach the fuel metering unit more efficiently for the 2.0 and 1.4 ‘TSI’ turbo engines and the 2.0 TDI in Golf...

WHAT’S SO SPECIAL? One of our most popular products is the VWR Cold-Air Intake System kit, enabling cold, dense air from outside the engine bay to reach the fuel metering unit more efficiently for the higher-output 2.0 TFSI K04 engines in Golf 6R, Scirocco...

BOOST HOSE UPGRADE KIT The RacingLine Boost Hose package replaces the original rubber charge pipes with beautiful smooth-flowing silicone replacements, uniquely reinforced with internal wiring for guaranteed stiffness under the demands of high heat and boost levels. The kit is a direct OEM replacement:...

Silicone Intake Pipe The Ramair Silicone Intake Pipe has been designed to replace the standard OEM plastic induction hose on the 2.0 TSI EA888 engine in the VW Golf mk7 GTI, VW Golf mk7 R, Audi S3, SEAT Leon Cupra and other MQB platform...

CTS Turbo is proud to release our N54 Chargepipe kit, which is designed to work with your factory diverter valve! The CTS Turbo kit features 3″ mandrel-bent T6 6061 aluminum pipe with a robust black powder-coated finish. Keeping the chargepipe firmly secured to your...