1
23766900758_d84f6efebf_c
23766897138_ce7160db82_c
37587547692_e86b80e968_c
37587547392_6341775128_c
1
23766900758_d84f6efebf_c
23766897138_ce7160db82_c
37587547692_e86b80e968_c
37587547392_6341775128_c
RacingLine

Racingline High Flow Turbo Inlet – MK7 GTI/R, 6C Polo, 8V S3, 5E VRS

$350.00 In Stock Sold out

1-3 Dispatch On In-Stock Items

100% Genuine Quality Parts

Workshop Install Available

  • Description
  • Shipping & Backorder
  • VEHICLE FITMENT

VWR E 12G7R600IT INLET

The VWR High Flow Turbo Inlet has been engineered as a simple upgrade to significantly increase air flow into the turbocharger. It’s the perfect complement to either our R600 Cold Air Intake, the standard airbox or indeed any other aftermarket intake system.

A simple fitment, the VWR High Flow Turbo Inlet is a large diameter, free flowing intake elbow, CNC machined from aluminium billet to replace the small and restrictive plastic factory inlet.

Without it the potential of any high flow intake system is wasted because any smooth flowing intake charge has to taper down to pass through the tight and restrictive bend of the factory part.

The result? Back-to-back comparisons against the factory elbow on our flow bench reveals an impressive improvement in airflow. We’ve seen some surprisingly significant power and torque increases from the fitment of the VWR High Flow Turbo Inlet as a result of the faster turbo spool and increased airflow it generates. It’s also possible to hear an enhanced sound from the turbo which comes as another benefit for any enthusiast.


KEY TECH SPECS

EXTENSIVE COMPATIBILITY

The VWR High Flow Turbo Inlet is compatible with all factory IHI turbos used in the MQB EA888 1.8T and 2.0T engined cars, as well as the R600 intake, factory airbox, or any other aftermarket intake.


POWER GAINS

By removing the standard plastic elbow’s highly restrictive airflow path between the inlet pipe and the turbocharger, the VWR High Flow Turbo Inlet gives a worthwhile power gain through smoothing and opening the turn into the turbo.


FUTURE-PROOF

The higher the power level, the greater the benefit. That’s why the VWR High Flow Turbo Inlet will be included in our Stage 3 upgrade = we simply can’t get to the power levels without it.


HIGH QUALITY

CNC constructed from T6-6061 aircraft grade aluminium and hard anodised in gloss black for long lasting, high quality finish. A white laser-etched Racingline logo is the final touch.


SIMPLE FITTING

Fitting is very straightforward. The VWR High Flow Turbo Inlet can be installed in around 10 minutes using just hand tools and easily returned to standard if desired.


MATCHED PARTS

The VWR High Flow Turbo Inlet is perfectly matched with other Racingline parts. Worthwhile power and response gains can be realised when the VWR High Flow Turbo Inlet is used in combination with the VWR High Flow Turbo Inlet Pipe, R600 Cold Air Intake and Turbo Turbo Muffler Delete.

 

Note: To fit on 6C Polo GTI and 8X Audi S1, you will need to purchase 06K 103 213A PCV hose. This is due to the location of the PCV on the factory turbo elbow.

 

 

Can’t find the part you're after?

We can source all Racingline parts including those not listed on our website.

Click here to contact us if the part you're searching for isn't listed.

VW GOLF MK7/7.5 GTI & CLUBSPORT (2013-2020) 

VW GOLF MK7/7.5 R (2013-2020)

VW GOLF MK7/7.5 (2013-2020) 1.8TSI 

VW PASSAT B8 (2015+) 2.0TSI 

VW ARTEON (2017+) 2.0TSI 

VW T-ROC R (2019+) 2.0TSI 

VW TIGUAN II (2016+) 2.0TSI 

VW JETTA VII (2018+)

AUDI S1 (2015-2018) 2.0TFSI 

AUDI S3 8V (2013-2020) 

AUDI A3 8V (2013-2020) 1.8TSI &2.0TSI 

AUDI TT MK3 8S (2014+) 2.0TSI

AUDI TTS MK3 8S (2015+) 2.0TSI

AUDI SQ2 (2018+)

AUDI Q3 45TFSI (2018+) 2.0TSI

SKODA OCTAVIA III VRS 5 (2014-2020) 2.0TSI 

SKODA SUPERB III 3V (2015+) 1.8TSI & 2.0TSI